Research gapEngineering & technology

IoT in logistics: five research directions from optimisation models to e-waste reverse logistics

Tags, sensors and connected vehicles can make goods visible across a supply chain in real time (Al-Fuqaha et al., 2015). Five questions remain open: how to design these systems optimally, how to handle uncertainty, how to learn from cases, how small firms can afford them, and how to bring devices back at end of life.

PhD Research Lab InsightsEditorial team, reviewed by a subject specialist
Posted
4 October 2021
Last checked
8 October 2026
Reading time
7 min
Sources
11
Research proposal support
The gap

IoT in logistics is well described at the level of technologies and architectures (Al-Fuqaha et al., 2015; ISO/IEC, 2024), but there is little tested guidance on designing such systems under uncertainty, on making them affordable for small firms, or on handling the devices themselves at end of life (Fortino et al., 2021; Rawat et al., 2024).

Design gap (optimisation and integration)Uncertainty gap (robust decisions)Method gap (case-based learning)Access gap (cost for SMEs)Sustainability gap (e-waste)

What we know

  • IoT combines sensing, connectivity and data services in layered architectures (Al-Fuqaha et al., 2015), now set out in an international reference architecture (ISO/IEC, 2024).
  • Large IoT deployments behave as systems of systems, which makes them hard to design, integrate and test (Fortino et al., 2021).
  • Barriers such as cost, skills and infrastructure slow Industry 4.0 adoption, especially in SMEs (Kamble et al., 2018; Rawat et al., 2024).
  • Connected devices widen the attack surface, and intrusion detection for IoT is an active field (Rahman et al., 2020).
  • Since 2020, attention has moved to the resilience and viability of whole supply networks (Ivanov & Dolgui, 2020).

What we do not know yet

  • How to optimise the design of a logistics IoT network jointly with the decisions it supports (Fortino et al., 2021).
  • Whether IoT data actually improve decisions under uncertainty and disruption (Ivanov & Dolgui, 2020).
  • How lessons from one deployment transfer to another, given few comparable case studies (Eisenhardt, 1989).
  • What makes IoT affordable and useful for small logistics firms in emerging economies (Rawat et al., 2024; Vang & Balslev Clausen, 2025).
  • How tags, sensors and gateways are collected, reused or recycled at end of life.

Research questions a PhD could ask

  1. How should sensor placement and data frequency be chosen to balance cost against forecast accuracy in a distribution network?
  2. Do real-time location data reduce the effect of disruptions on delivery performance?
  3. What design principles recur across successful and failed logistics IoT deployments?
  4. Which cost and skills barriers matter most for small freight and warehousing firms?
  5. How can product identity data support the return and recycling of electronic devices?
Methods that could close the gap
ApproachWhy it fits
Mathematical optimisationModel the design of the IoT network together with the logistics decisions it informs (Fortino et al., 2021).
Simulation and digital twinsTest designs and disruption scenarios before deployment (Kritzinger et al., 2018; Ivanov & Dolgui, 2020).
Multiple case studiesCompare deployments to build theory about what works and why (Eisenhardt, 1989; Näslund, 2002).
Surveys and structural modellingRank adoption barriers among SMEs (Kamble et al., 2018; Rawat et al., 2024).
Engaged or intervention researchWork with firms in the Global South to design and test solutions (Vang & Balslev Clausen, 2025).
Gap typeIndustry problem, research still limited

The problem

Logistics firms invest in tags, sensors and connectivity to see where goods are, but there is little evidence on how to design these systems well, how much they help under uncertainty, and who can afford them (Fortino et al., 2021; Rawat et al., 2024).

Why it happens

Deployments are complex systems of systems (Fortino et al., 2021); costs and skills limit smaller firms (Kamble et al., 2018; Rawat et al., 2024); and studies often describe technologies rather than test decisions or outcomes.

Where it is felt most

The gap is widest for SMEs and for logistics in emerging economies (Rawat et al., 2024; Vang & Balslev Clausen, 2025), and in reverse logistics, where devices must be recovered at end of life.

What studies say, and at what level of evidence
LevelWhat it shows
Systematic reviews and meta-analysesSurveys and reviews describe enabling technologies and design methods (Al-Fuqaha et al., 2015; Fortino et al., 2021).
Trials or field studiesFew field studies measure the effect of IoT on logistics outcomes; engaged research designs are proposed (Vang & Balslev Clausen, 2025).
Observational studiesSurvey and modelling studies rank adoption barriers (Kamble et al., 2018; Rawat et al., 2024).
Lab and simulation studiesDigital twins and simulations test designs before deployment (Kritzinger et al., 2018).
Industry and policy reportsAn international reference architecture sets common terms (ISO/IEC, 2024).
What is missingOptimisation that links system design to decisions, evidence under disruption, and work on end-of-life devices.

Who should take this on

Scholar profile

  • An operations researcher able to build optimisation or simulation models.
  • An engineer with access to a logistics operator's IoT data.
  • A management researcher who can study adoption in SMEs.
  • An environmental engineer interested in reverse logistics for electronics.

Subjects and PhD specialisations

  • Logistics and supply chain management
  • Industrial and systems engineering
  • Operations research
  • Computer and network engineering
  • Environmental engineering

Countries where the problem is greatest

Scope for future research

  1. Joint optimisation of IoT network design and logistics decisions (Fortino et al., 2021).
  2. Robust decisions with IoT data under uncertainty and disruption (Ivanov & Dolgui, 2020).
  3. Case-based learning across deployments (Eisenhardt, 1989).
  4. Affordable IoT for small logistics firms (Rawat et al., 2024).
  5. Reverse logistics for tags, sensors and other electronic devices.
  6. Secure IoT for logistics (Rahman et al., 2020).

How a doctoral project could address it

  1. Pick one direction

    Choose one of the five directions and one logistics setting.

  2. Find a partner

    Agree access to an operator's data or sites, or to an SME network.

  3. Build or select a model

    Use optimisation, simulation or a digital twin to test designs (Kritzinger et al., 2018).

  4. Collect field evidence

    Use cases or surveys to test whether the model's assumptions hold (Eisenhardt, 1989; Näslund, 2002).

  5. Assess security

    Check the security of the system studied (Rahman et al., 2020).

  6. Report outcomes

    Report effects on cost, lead time, accuracy or recovery, not only technical performance.

Why it is worth solving

Well-designed IoT could help logistics firms respond faster to disruption (Ivanov & Dolgui, 2020), and affordable designs would let small firms benefit, not only large ones (Rawat et al., 2024).

For research, it would move the field from describing technologies to testing designs and outcomes, and bring the end-of-life impact of devices into view (Fortino et al., 2021).

Why these directions matter now

Logistics covers the movement and storage of goods and the information that goes with them. IoT technologies such as RFID tags, near-field communication and GPS trackers can report where goods are and in what condition (Al-Fuqaha et al., 2015).

The research questions have also shifted. After 2020 the priority became keeping networks viable through long disruptions (Ivanov & Dolgui, 2020), and the practical question became whether firms, especially smaller ones, can afford and use these systems (Rawat et al., 2024).

The five directions

Five research directions for IoT in logistics
No.DirectionFuture scope
1Mathematical approaches for optimally modelling and designing IoT systemsOptimisation linked to the decisions the system supports is still nascent (Fortino et al., 2021)
2Tools for handling sources of uncertaintyMonitoring can reduce risk; robust models for investment and operation are needed (Ivanov & Dolgui, 2020)
3Case-based research strategyNo common method for adapting cases to logistics IoT design (Eisenhardt, 1989)
4Cost-efficiencyHigh costs, infrastructure and training needs burden SMEs (Kamble et al., 2018; Rawat et al., 2024)
5Waste electrical and electronic equipment (e-waste)Reverse logistics and closed-loop chains; product identity data could support recovery

Common mistakes in proposals on this topic include describing technologies without a decision or outcome to improve, assuming IoT data are accurate and secure, and studying only large firms. A stronger proposal names the decision, tests data quality and security (Rahman et al., 2020), and includes smaller firms (Vang & Balslev Clausen, 2025).

Worked example (illustrative): a researcher works with a regional parcel carrier. She builds a simulation of its network, tests three tracking designs that differ in tag type and reading points, and compares their cost with the reduction in lost or late parcels. Interviews with depot managers check whether the simulated decisions match practice.

Feasibility and links

Directions 1, 2 and 4 are feasible with modelling skills and one industry partner. Direction 3 needs access to several deployments. Direction 5 needs partners in electronics recovery as well as logistics, and is the least studied.

For warehousing specifically, see the brief on IoT in warehousing and logistics; for risk prediction, see machine learning for supply chain risk.

What to do now

  • Read Fortino et al. (2021) and Ivanov and Dolgui (2020) and choose one of the five directions.
  • Name the logistics decision your study will improve and how you will measure it.
  • Identify a partner firm, including at least one SME if your direction concerns cost.
  • Agree data access and ethics approval with your supervisor before collecting data.
Your next step

Could this gap become your thesis?

  1. 1Read the evidence and the open questions
  2. 2Talk to a mentor about fit, data and method
  3. 3Build a defensible proposal
See proposal support

Questions scholars ask

How many IoT devices are there?

Forecasts vary widely and older ones were not met, so cite a current figure from its original source rather than a forecast.

Do I need an industry partner?

For field evidence, yes. Optimisation and simulation studies can start without one but need realistic data (Kritzinger et al., 2018).

Is security part of this topic?

It should be. Every connected device adds a possible point of attack (Rahman et al., 2020).

Sources

  1. Al-Fuqaha, A., Guizani, M., Mohammadi, M., Aledhari, M., & Ayyash, M. (2015). Internet of things: A survey on enabling technologies, protocols, and applications. IEEE Communications Surveys & Tutorials, 17(4), 2347-2376. https://doi.org/10.1109/COMST.2015.2444095
  2. Eisenhardt, K. M. (1989). Building theories from case study research. Academy of Management Review, 14(4), 532–550. https://doi.org/10.5465/amr.1989.4308385
  3. Fortino, G., Savaglio, C., Spezzano, G., & Zhou, M. (2021). Internet of things as system of systems: A review of methodologies, frameworks, platforms, and tools. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 51(1), 223-236. https://doi.org/10.1109/TSMC.2020.3042898
  4. International Organization for Standardization & International Electrotechnical Commission. (2024). Internet of things (IoT): Reference architecture (ISO/IEC Standard No. 30141:2024, 2nd ed.). https://webstore.ansi.org/standards/iso/isoiec301412024
  5. Ivanov, D., & Dolgui, A. (2020). Viability of intertwined supply networks: Extending the supply chain resilience angles towards survivability. A position paper motivated by COVID-19 outbreak. International Journal of Production Research, 58(10), 2904–2915. https://doi.org/10.1080/00207543.2020.1750727
  6. Kamble, S. S., Gunasekaran, A., & Sharma, R. (2018). Analysis of the driving and dependence power of barriers to adopt industry 4.0 in Indian manufacturing industry. Computers in Industry, 101, 107–119. https://doi.org/10.1016/j.compind.2018.06.004
  7. Kritzinger, W., Karner, M., Traar, G., Henjes, J., & Sihn, W. (2018). Digital twin in manufacturing: A categorical literature review and classification. IFAC-PapersOnLine, 51(11), 1016–1022. https://doi.org/10.1016/j.ifacol.2018.08.474
  8. Näslund, D. (2002). Logistics needs qualitative research: Especially action research. International Journal of Physical Distribution & Logistics Management, 32(5), 321–338. https://doi.org/10.1108/09600030210434143
  9. Rahman, S. A., Tout, H., Talhi, C., & Mourad, A. (2020). Internet of things intrusion detection: Centralized, on-device, or federated learning? IEEE Network, 34(6), 310–317. https://doi.org/10.1109/MNET.011.2000286
  10. Rawat, P., Yashpal, & Purohit, J. K. (2024). Evaluating and prioritizing the barriers of Industry 4.0 implementation in Indian SMEs: An ISM approach. Journal of The Institution of Engineers (India): Series C, 105(3), 543–560. https://doi.org/10.1007/s40032-024-01042-2
  11. Vang, J., & Balslev Clausen, H. (2025). Grand challenges and supplier development in the Global South: Why experiment with new (ethnographic) intervention research methods. The International Journal of Logistics Management, 36(4), 1136–1146. https://doi.org/10.1108/IJLM-04-2024-0216

How to cite this page

Choose your referencing style, then copy.

PhD Research Lab Insights. (2021, October 4). IoT in logistics: five research directions from optimisation models to e-waste reverse logistics. PhD Research Lab. https://www.phdassistance.com/blog/phd-research-opportunities-on-internet-of-things-logistics/

PhD Research Lab Insights. “IoT in Logistics: Five Research Directions from Optimisation Models to E-waste Reverse Logistics.” PhD Research Lab, 4 Oct. 2021, www.phdassistance.com/blog/phd-research-opportunities-on-internet-of-things-logistics. Accessed [access date].

PhD Research Lab Insights (2021) IoT in logistics: five research directions from optimisation models to e-waste reverse logistics. PhD Research Lab. Available at: https://www.phdassistance.com/blog/phd-research-opportunities-on-internet-of-things-logistics/ (Accessed: [access date]).

PhD Research Lab Insights. “IoT in Logistics: Five Research Directions from Optimisation Models to E-waste Reverse Logistics.” PhD Research Lab. October 4, 2021. https://www.phdassistance.com/blog/phd-research-opportunities-on-internet-of-things-logistics.

PhD Research Lab Insights, ‘IoT in Logistics: Five Research Directions from Optimisation Models to E-waste Reverse Logistics’ (PhD Research Lab, 4 October 2021) <https://www.phdassistance.com/blog/phd-research-opportunities-on-internet-of-things-logistics> accessed [access date].

PhD Research Lab Insights. IoT in logistics: five research directions from optimisation models to e-waste reverse logistics [Internet]. PhD Research Lab; 2021 Oct 4 [cited [access date]]. Available from: https://www.phdassistance.com/blog/phd-research-opportunities-on-internet-of-things-logistics/

PhD Research Lab Insights, “IoT in logistics: five research directions from optimisation models to e-waste reverse logistics,” PhD Research Lab, Oct. 4, 2021. [Online]. Available: https://www.phdassistance.com/blog/phd-research-opportunities-on-internet-of-things-logistics. [Accessed: [access date]].

@online{phd_research_opportunities_on_internet_of_things_logistics_2021,
  author = {{PhD Research Lab Insights}},
  title = {{IoT in logistics: five research directions from optimisation models to e-waste reverse logistics}},
  organization = {PhD Research Lab},
  date = {2021-10-04},
  url = {https://www.phdassistance.com/blog/phd-research-opportunities-on-internet-of-things-logistics},
  urldate = {[access date]}
}

  • Internet of Things
  • Logistics
  • RFID
  • Reverse logistics
  • Industry 4.0
IoT in logistics: five research directions from optimisation models to e-waste reverse logResearch gap · Engineering & technology
Proposal support